Server Cabinet 42U 600(W)X1200(D)
For the placement of servers and other network equipment to provide a good and stable operating environment.
Order Code: SCB0342U612
With a slightly curved front door, a double back door, and a rotation angle of 140 degrees, this server cabinet provides a ventilation rate of more than 74%, providing adequate cooling for the system.
There are square holes with M6 mounting holes for easy installaion. With U logarithmic scale representation, it’s easy to place devices anywhere you want.
Front, back, and side doors can be easily disassembled, the side door has a two-stage design to reduce the weight load of the cabinet.
Convenient Locking Mechanism
Pull and rotate the handle to open the door. Push the door back to lock the door with the key.
The double door is designed for to allow for small space equipment installation and maintenance.
Convenient Cable Entry
Cable entry is at the top and bottom, with plastic stringing holes for cable commissioning and maintenance.
Lifetime Limited Warranty
The cabinet and accessories have lifetime limited warranty. This warranty includes parts cost on all components found to be defective in material or workmanship under normal use, which shall not apply to surface scratch during day to day use or modification. Products to be repaired under this warranty must be returned to Sharkrack or a designated service center with prior notification.
Technical Performance and Parameters
|Structure(Raw materials, welding, spraying)||Black / static plastic coating|
|Safety Certificate||RoHs Compliant|
|1||Top cover||1||Pcs||1.2mm cold rolled steel||Powder coated||------|
|2||Under cover||1||Pcs||1.2mm cold rolled steel||Powder coated||2 pieces|
|3||Cable Tray||2||Pcs||1.5mm cold rolled steel||Powder coated|
|4||Frame weldment||2||Pcs||1.2mm cold rolled steel||Powder coated|
|5||Column holder||4||Pcs||1.5mm cold rolled steel||Powder coated|
|6||Column||4||Pcs||2.0mm cold rolled steel||Powder coated||With mounting screw|
|7||Side panel||4||Pcs||1.2mm cold rolled steel||Powder coated||With side door locks of same key|
|8||Front door||1||Pcs||1.2mm cold rolled steel||Powder coated||perforated metal door with lock|
|9||Rear door||1||Pcs||1.2mm cold rolled steel||Powder coated||perforated double doors with lock|
|11||Ground Stud||10||Pcs||on Frame, fromt/rear doors and side panels|
Kit: 42U: 40 sets, 40 sets of M6x12 square nut assembly
Note: cover, under cover, and doors connected to the ground terminal without a valid
|1||Side Door||4||1||High Quality Cold Rolled Steel Plate, 1.5mm||Static Plastic Coating||Two side doors, ≤27U, fitted with lock button.|
|2||Cantilever Plate||1||1||High Quality Cold Rolled Steel Plate, 1.5mm||Static Plastic Coating||Fitted with mounting screws|
|3||Shelf||1||1||High Quality Cold Rolled Steel Plate, 1.2mm||Static Plastic Coating||Fitted with mounting screws|
|4||Sliding shelf||1||1||High Quality Cold Rolled Steel Plate, 1.2mm||Static Plastic Coating||Fitted with mounting screws|
|5||2U locking Drawers||1||1||High Quality Cold Rolled Steel Plate, 1.2mm||Static Plastic Coating||Fitted with mounting screws|
|6||Binding Wire Stents||1||1||High Quality Cold Rolled Steel Plate, 2.0mm||Static Plastic Coating||Fitted with mounting screws|
|7||Blank Plate||1||1||High Quality Cold Rolled Steel Plate, 1.2mm||Static Plastic Coating||Fitted with mounting screws|
|8||Cooling Fan||1||1||High Quality Cold Rolled Steel Plate, 0.8mm||Static Plastic Coating||Fitted with mounting screws|
|9||Screw M5||1||1||Black Coating||Static Plastic Coating||M5|
|10||cage nuts and M6||1||1||Galvanized||Static Plastic Coating||M6|
|11||Screw M6||1||1||Black zink coating||Static Plastic Coating||M6|
|12||PDU||1||1||Aluminum alloy, ABS Engineering Plastic||Level Mounted/Vertical Mounted|